manualshive.com logo in svg

Motorola WiNG 5.7.1, Справочное руководство системы

Поделиться
Скачать
Motorola WiNG 5.7.1 Скачать руководство пользователя страница 65

3 - 29

3.1.2.4 Radio Configuration

Advanced Setup Wizard

Use the 

Radio Configuration 

screen to define radio support for the 2.4 GHz radio band, 5.0 GHz radio band or set the radio 

as a dedicated sensor.

Figure 3-18

Initial Setup Wizard - Radio Configuration screen of the Advanced Setup Wizard

1. Set the following for each radio:

•

Configure as a Data Radio

 - Select this option to dedicate this radio to WLAN client support in the selected 2.4 GHz 

or 5.0 GHz radio band.

•

Radio Frequency Band

 - Select the 2.4 GHz or 5.0 GHz radio band to use with the radio when selected as a Data Radio. 

The selected band is used for WLAN client support. Consider selecting one radio for 2.4 GHz and another for 
5.0 GHz support (if using a dual or three radio model) when supporting clients in the 802.11bg, 802.11n and 802.11ac 
bands.

NOTE: 

The 

Radio Configuration

 screen displays separate configurable fields for each 

access point radio. Supported access point models can have from one to three (AP7131) 
radios. The 

ADSP Sensor Server

 field displays at the bottom of the screen only if one 

of the radios has been dedicated as a sensor.

Содержание WiNG 5.7.1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды