Motorola PMP 320, Установка оборудования

Страница: 20 / 146

1-20 PMP320HDW2v1
Preliminary
JUL 2010
PMP 320 Hardware Installation Access Point (AP)
Access Point (AP)
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■
■
A PMP 320 Access Point (AP) is an 802.16e micro base station that connects wirelessly to up to
200 PMP 320 Cluster Subscriber Modules (CSMs) or CPEs (Customer Premise Equipment). The
AP consists of a antenna and radio, as shown in
Figure 1-2 , with the radio shown separately in
Figure 1-3 . The standard antenna is a dual-polarity 16.5 dBi antenna typically mounted in a
four 90° sector configuration. The AP is manageable by local web interface, as well as SNMP or
the Motorola One Point Wireless Manager.
WARNING
Installing an AP involves height, electricity, and exposure to RF (radio frequency) energy.
To avoid personal injury, follow applicable national and local safety regulations along with
industry best practices. Also follow the specific guidelines in this document, including
maintaining a sustained exposure separation distance of 50 cm (~20 inches)
as described in the Regulatory, Legal, and Safety Notice in this document.
Figure 1-2 Access Point (AP) shown with antenna attached and mounted on pole
Rotate Up
To vertical poistion.
Radio attached
to Antenna with
Appropriate Hardware