5.3.3 SEAT MOUNTED CANTILEVER ARMRESTS
i)
Height Adjustment:
loosen locking handle to
adjust armrest height
ultra-rail
Height Adjustment
Range =
3.5”
Motion Concepts seat mounted cantilever armrests are mounted to the seat frame ultra-rail allowing optimal
positioning and independent adjustment:
The standard recline armrest has an adjustable pivot arm to allow
height adjustments in 1/2” (13mm) increments.
To adjust height:
1. Remove the mounting hardware
(2 screws)
and slide the pivot arm
(
1
) up/down to the desired height and reinstall hardware.
2. Adjust the armrest receiver assembly to match the
height adjustment of the pivot arm assembly (
2
); (Loosen
the two screws/t-nuts
(not shown)
on the inside off the
armrest receiver and slide the armrest receiver up/down
the recline cane to the desired height & retighten screws.
For side transfers, the recline armrest can be rotated
backwards around the pivot pin in the armrest receiver.
To rotate the armrest:
disengage the lever lock at the
front of the side frame, and lift up on the armrest so that it
pivots back around the armrest receiver/pin (
3
).
To remove the armrest:
unlock the lever lock at the front
of the armrest and disengage the pivot arm. Pull outward
on the plunger at the rear pivot of the armrest (
4
) and
remove the armrest assembly.
Plunger
Lever Lock
Recline
Cane
3
4
2
Pivot Arm
Ass’y
1
Armrest Receiver
WARNING! Risk of serious injury or damage.
•
When performing transfer activities into and out of the wheelchair, DO NOT use the armrest for load
bearing support. To prevent the risk of personal injury and/or damage to the armrests, transfers should be
performed using designated transfer handles, and in the presence of an attendant whenever possible.
WARNING! Risk of serious injury or damage.
•
When performing transfer activities into and out of the wheelchair, DO NOT use the armrest for load
bearing support. To prevent the risk of personal injury and/or damage to the armrests, transfers should be
performed using designated transfer handles, and in the presence of an attendant whenever possible.
•
Before travelling in your wheelchair and/or operating your power positioning system,
always
ensure
the armrests are securely locked in place.
5.3.2 RECLINE ADJUSTABLE HEIGHT ARMRESTS:
5.0
5.0
SEATING ACCESSORIES & COMFORT ADJUSTMENTS
SEATING ACCESSORIES & COMFORT ADJUSTMENTS
- 51 -
Содержание ULTRA-LOW MAXX UPFRONT MPPS
Страница 99: ......