Motion Concepts ULTRA-LOW MAXX UPFRONT MPPS Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 100

background image

i)

J

OYSTICK

D

EPTH

A

DJUSTMENT

:

• Loosen the adjustment knob (screw) on the outside of the
joystick mounting bracket (

1

)

• Set the joystick to the desired length by sliding the mounting
tube forward or backward.
• Re-tighten the adjustment knob (screw).

ii)

J

OYSTICK

H

EIGHT

A

DJUSTMENT

:

• Loosen the mounting screws

(x2)

on the joystick clamping

bracket (

2

).

• Adjust the lower mounting plate up or down (via slots) of the
mounting bracket to establish the desired joystick height.
• Re-tighten the mounting screws on the clamping bracket.

1

2

Height

Adjustment

Depth Adjustment

NOTE:

The type of joystick can vary depending on the type of power base electronics.

The following

images are provided for reference only.

5.1.1 STANDARD JOYSTICK MOUNTING

The following tools are recommended to complete the adjustments contained in this manual:

• metric/standard socket set and ratchet
• metric/standard hex key set
• adjustable wrench

Motion Concepts offers a wide range of positioning features/options and we are constantly developing new
innovative products to address the needs of our customers. The following information is provided to illustrate
the various accessories and adjustments available on the Rovi Upfront Power Positioning System. Please
note the components/accessories on your wheelchair may differ from those illustrated in this manual. If you
have any questions or concerns related to your specific system that are not addressed in this Owners Manual,
please contact your Service Provider or Motion Concepts directly for further assistance.

WARNING! Risk of Serious Injury or Damage

• Your Rovi Upfront MPPS has been set-up/adjusted in accordance with the user specifications provided
at the time of order, and further adjustments are not typically required.
• There are a limited number of adjustments that may be safely performed by the end user. To ensure
that adjustments are completed properly, it is preferred to have all adjustments performed by a Qualified
Technician.
• If there is an adjustment required that is not indicated in this manual, DO NOT perform that adjustment.
Contact your Service Provider to arrange for service.

5.0

5.0

SEATING ACCESSORIES & COMFORT ADJUSTMENTS

SEATING ACCESSORIES & COMFORT ADJUSTMENTS

Once you become familiar with the operation of your power positioning system, you may find a need to make
some basic adjustments to improve your comfort. The following section identifies a variety of features
and adjustment options available on the Rovi Upfront MPPS.

- 47 -

5.1 Joystick Positioning and Adjustment

«
...
45
46
47
48
49
...
»

Содержание ULTRA-LOW MAXX UPFRONT MPPS





































































































Отзывы:

Нет отзывов

Похожие инструкции для ULTRA-LOW MAXX UPFRONT MPPS

Бренд: Coaster Страницы: 5

Бренд: Handicare Страницы: 99

Бренд: ubiolabs Страницы: 95

Бренд: Otto Bock Страницы: 26

Бренд: Rebotec Страницы: 8

Бренд: Rebotec Страницы: 12

Бренд: CareCo Страницы: 18

Бренд: Karisma Страницы: 20

Бренд: Küschall Страницы: 26

Бренд: Blumil Страницы: 15

Бренд: EZee Life Страницы: 36

Mustang Powered Wheelchair

Бренд: Mustang Страницы: 24

8020 Self Propelling

Бренд: Karma Страницы: 8

Бренд: Quickie Страницы: 204

Nitrum Caster Fork Angle

Бренд: Quickie Страницы: 2

Бренд: Lumex Страницы: 24

PROTEKT GAZELLE

Бренд: Proactive Страницы: 4

Бренд: ProActiv Страницы: 48

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды