Motion Concepts ULTRA-LOW MAXX UPFRONT MPPS Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 100

background image

- 39 -

All Rovi-Upfront Power Positioning Systems come standard with an

Remote Attendant Control,

as part

of our standard electronics. The Remote Attendant Control is connected directly into the M-Series seat
control box, and is mounted at the rear (back) of the power positioning system. The Remote has a
backlit LCD display and a directional key pad which allows an attendant, or healthcare provider, to select
and operate the power positioning functions on the wheelchair.

NOTE:

The Remote Attendant Control also functions as a multi-functional hand-held electronics

programming device

.

Programming access for the Remote is password protected, and restricted

to Qualified Technical Service personnel only. For additional information on programming options
and other features available with the Remote Attendant Control, please refer to

Section 4.0-

Electronics

(4.1.2 - Remote Attendant Control)

3.6.1 REMOTE ATTENDANT CONTROL- FEATURE OVERVIEW:

Select/Save

Button

Exit/Back

Button

Left/Right Arrows

w

Standard Mode:

SelectMotor Function

LED

Indicator

LCD Screen

Display

TOP

Up/Down Arrows

w

Standard Mode:

Operate Motor Function

NOTE:

When not in use, the

screen display

is designed to enter into sleep mode after 10 sec. Pressing

any button on the remote will re-awaken the display.

1

2

3

TILT

TILT

FORWARD

TILT

BACKWARD

3.6.2 ATTENDANT CONTROL INSTRUCTIONS (Operating the Power Positioning System)

1. Use

LEFT/RIGHT

arrows (

1

) to scroll through the available power positioning (motor) functions (i.e. Tilt,

Recline, Elevate, etc..).

Note

: the remote will only display the power positioning functions that are available

2. Select the desired motor function (on the screen display), then press and hold the

UP/DOWN

arrows (

2

) and

(

3

) to operate the actuator. The power positioning function and direction of travel will be indicated on the dis-

play screen

(See example below showing Tilt function)

.

3.6 Operating the ROVI REACH PPS - Thru the Remote Attendant Control

IMPORTANT!

The RNet Remote Joystick MUST be powered on to enable the Remote Attendant Control.

3.0 PROGRAMMING

3.0 PROGRAMMING

AND

AND

OPERATING

OPERATING

YOUR

YOUR

ROVI-UPFRONT MPPS

ROVI-UPFRONT MPPS

«
...
37
38
39
40
41
...
»

Содержание ULTRA-LOW MAXX UPFRONT MPPS





































































































Отзывы:

Нет отзывов

Похожие инструкции для ULTRA-LOW MAXX UPFRONT MPPS

Бренд: Decon wheel Страницы: 26

Бренд: Quantum Страницы: 20

Бренд: Quantum Rehab Страницы: 59

Бренд: Quantum Страницы: 48

Kanga 1300-921110

Бренд: Inspired by drive Страницы: 8

Бренд: Quantum Rehab Страницы: 59

Бренд: B+B Страницы: 61

Бренд: Jay Страницы: 36

Бренд: EasyRoller Страницы: 12

ROHO Hybrid Elite 1RHE1414C-SR

Бренд: Permobil Страницы: 128

OBUSFORME CustomAIR OFCA-BLK

Бренд: HoMedics Страницы: 24

Бренд: DYN-ERGO Страницы: 15

Бренд: Veldink4kids Страницы: 35

Бренд: AAT Страницы: 40

Freedom Gold Series

Бренд: Miracle Mobility Страницы: 44

Бренд: Sencon Страницы: 18

Бренд: Leckey Страницы: 16

Бренд: Leckey Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды