Motion Concepts ULTRA-LOW MAXX UPFRONT MPPS Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 100

background image

- 46 -

The Rovi-Upfront MPPS is equipped with two anti-tip limit/lockout switches. These mechanical limit switches
are designed to function as a safety feature to ensure the front anti-tipper mechanism is properly engaged/dur-
ing the anterior-tilt function and/or the elevate/reach function. If the anit-tipper mechanism fails to engage,
the power positioning function will be ‘locked-out’. These limit switches will prevent the activated seat function
from proceeding any further.

(

Note

: once the limit switches are engaged, the seating system will only be per-

mitted to return to the established home position).

The Tipsy Angle Sensor is a programmable limit switch that utilizes a separate angle sensor mounted to
the seating system (refer to images that follow). The

M11 Tipsy

angle sensor is utilized with the M-Series

seat control and may be programmed (by a Qualified Technician) via the M270 Remote Attendant Control.

The tipsy angle sensors allows for the individual programming of up to 4 limits:

Home Position, Reduced

Drive Speed, DLO Limit

and the

Max Tilt (Tilt/Recline) Limit.

Home Position

Home Setting

=

0° - 20° Max

Reduced DriveSpeed Limit

RDS Limit

=

10° - 20° Max

Drive Lockout (DLO) Limit

1

Max. DLO Limit

=

30°

(with Reduced Drive Speed)

Max. DLO Limit

=

25°

(without Reduced Drive Speed)

Maximum Back Angle

2

:

Max. Tilt Limit

=

45°

Max. Tilt/Recline Limit

=

168°

for Tilt/Recline

1

Note

: DO NOT exceed the maximum recommended DLO Limit.

2

Note

: The Tilt function is locked out (does not function) when the Rovi-Upfront MPPS is in an Elevated/Reach position;

the Max Recline Limit is restricted to a

maximum 48°

when the Rovi-Upfront MPPS is in an Elevated/Reach position.

4.3.4 FRONT ANTI-TIP LIMIT/LOCKOUT SWITCH

4.0

4.0

ELECTRONICS

ELECTRONICS

4.3.5 TIPSY ANGLE SENSOR

«
...
44
45
46
47
48
...
»

Содержание ULTRA-LOW MAXX UPFRONT MPPS





































































































Отзывы:

Нет отзывов

Похожие инструкции для ULTRA-LOW MAXX UPFRONT MPPS

Бренд: Timago Страницы: 10

Бренд: Rehadapt Страницы: 8

Empulse StreetJet

Бренд: Sunrise Medical Страницы: 32

Бренд: Enigma Страницы: 23

Бренд: B+B Страницы: 38

Бренд: TGA Страницы: 8

Бренд: EZee Life Страницы: 6

ROHO AGILITY Mid Contour Back

Бренд: Permobil Страницы: 40

Бренд: Permobil Страницы: 100

Бренд: A2J Страницы: 11

Бренд: OFF CARR Страницы: 23

Бренд: identités Страницы: 9

Бренд: Quickie Страницы: 27

Бренд: Netti Страницы: 10

Бренд: HERO Страницы: 3

Бренд: Shoprider Страницы: 25

Бренд: Vitea Care Страницы: 6

Wheelchair Quickie 2 Lite

Бренд: Sunrise Medical Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды