Motion Concepts ULTRA-LOW MAXX UPFRONT MPPS, Руководство пользователя

Страница: 57 / 100

D. S
PREADER
B
AR
W
IDTH
A
DJUSTMENT
:
The spreader bar assembly on the tilt-only cantilever armrest can be adjusted to compensate for a change
in the seat width or back cane width (eg. endomorph back canes). There are four (4) spreadbar sizes/
configurations available to accomodate the range of seat/back cane widths available. Each spreader bar
configuration provides a
3” (5cm)
range of adjustment:
(13 “-15”, (33cm-38cm)) ; (16”-18”, (41cm-46cm)) ; (19”-21”, (48cm-53cm)) ; (22”-24”, (56cm-61cm))
The spreader bar assembly is designed to accommodate seat or back cane width adjustments in
1” (26mm)
increments. All spreader bar width adjustments should be made equally using the mounting holes in the left
and right cross support bars
(
1/2” (13mm)
hole spacing) . The middle crosstube should remain centered
between the back canes following any width adjustment.
Note: If a width adjustment moves from one spreader bar configuration to the next (e.g. moving from a
15”
(38cm)
width up to
16” (41cm)
width), then a new middle spreader bar will be required.
Adjusting the Spreader Bar Width:
1. Remove the adjustment screws/hardware (x2) from the middle crosstube of the spreader bar assembly.
2. Slide the left and right support bars inward/outward inside the middle crosstube, aligning the adjustment
holes in each support bar with the mounting hole in the middle crosstube.
3. Ensure the adjustments are made equally on both support bars, then reinstall the adjustment hardware
to secure the middle crosstube in place.
IMPORTANT!
Spreader bar (width) adjustments that will require an adjustment to the overall width of the seating system
should only be performed by a qualified technician (due to the complexity of the seat width adjustment). If
the width of your seating system needs to be adjusted, please contact your Dealer or Local Service Provider
for assistance.
1/2” (13mm) incremental
adjustments per side
middle
crosstube
left cross
support bar
adjustment
hardware (x2)
REAR VIEW
right cross
support bar
Width adjustments should
be made equally on both
cross support bars
Spreader Bar Assembly
5.0
5.0
SEATING ACCESSORIES & COMFORT ADJUSTMENTS
SEATING ACCESSORIES & COMFORT ADJUSTMENTS
- 57 -