E.
A
RM
P
AD
A
NGLE AND
R
OTATIONAL
A
DJUSTMENT
:
(Refer to
Fig. 6
below)
Loosen lever handle
to perform angle and
rotational adjustment
Pivot Ball
Fig. 6
1. Loosen
*
the lever handle on the underside of the Multi-Axis Support and rotate/pivot the arm pad to the
desired position angle relative to the arm rest tube.
(
*note
: do not fully remove lever handle)
2. Re-tighten the lever handle to secure the arm pad into position.
5.0
5.0
SEATING ACCESSORIES & COMFORT ADJUSTMENTS
SEATING ACCESSORIES & COMFORT ADJUSTMENTS
IMPORTANT!
Seat width adjustments will require additional adjustments to the back assembly and
front rigging and seat pan. Due to the complexity of a seat width adjustment, this adjustment must be
performed a qualified service technician. If you require a seat width adjustment, please contact your
Local Service Provider for assistance.
Motion Concepts power positioning systems are designed to allow for width adjustments when necessary,
and/or to accommodate growth over the expected service life of your seating system. The range of available
seat width adjustment varies depending on the size of seat frame installed:
Standard Adult Drop Seat:
W
IDTH
A
DJUSTMENT
R
ANGE
= 16”-20” (41
cm
-51
cm)
OR
19”-22” (48
cm
-53
cm
)
IMPORTANT!
Seat depth adjustments require additional compensating system adjustments to ensure
the safe operation and performance of the Rovi Upfront power positioning system. Seat depth adjust-
ments should only be performed by a Qualified Technician. If you require a seat depth adjustment,
please contact your Local Service Provider for assistance.
WARNING! Risk of Serious Injury or Damage.
• Altering the seat depth of your Rovi Upfront MPPS may compromise wheelchair stability, and reduce
traction & drive control and must ONLY be performed by a Qualified Service Technician.
•
NEVER adjust the seat depth on the Rovi Upfront MPPS by altering the mounting position (depth)
of the CM legrest hangers or the synchronized leg actuator (mounting bracket).
• If the fore/aft position of the Rovi Upfront MPPS (Anterior-Tilt module) is adjusted (on the power base)
for any reason, the front anti-tippers MUST also be re-adjusted to ensure they are aligned and functioning
properly during the elevate/reach and/or anterior-tilt function.
• Following an adjustment to the seating system depth, ALWAYS carefully test the seating system over
the full range of power positioning functions to ensure there is no interference with the front riggings,
electronic harnesses or any other component of the seating system, and ensure the wheelchair DOES
NOT easily tip forward or backward.
• If at any point you have any concerns with the stability of your wheelchair, keep the wheelchair in an
upright stable position and contact your Dealer/ Service Provider immediately to resolve the issue.
- 64 -
5.6 Seat Width Adjustment
5.7 Seat Depth Adjustment
Содержание ULTRA-LOW MAXX UPFRONT MPPS
Страница 99: ......