Motion Concepts ULTRA-LOW MAXX UPFRONT MPPS Скачать руководство пользователя страница 62 | Manualshive

Страница: 62 / 100

background image

1. Insert the

extension tube

extension tube into the front of the armrest tube

with the mounting hole aligned vertically (

1

).

2. Install the armpad using the mounting hole in the extension
tube & a mounting hole in the armrest tube (

2

).

5.4.3 ARMREST EXTENSIONS:

Armrest

Extension

Tube

1

2

Note:

The Multi-Axis Support may be mounted on either the left or the right armrest tube as desired.

The Multi-Axis Support may be installed onto any existing armrest tube to provide end users with infinite angle
and rotational adjustments. The Multi-Axis Support is designed to interface with Motion Concepts Multi-Position
Flat Arm Pads and Ergonomic Arm Pads.

(

Note:

Arm pads are sold separately)

A.

M

OUNTING

B

RACKET

I

NSTALLATION

:

(Refer to

Fig. 1a

/

1b

below)

MACES shown installed

with an Ergonomic Arm Pad

(arm pad sold separately)

(Optional Flat Hand Pad)

1. Align the upper clamping plate at the desired position on the armrest tube, then install the lower clamp around

the armrest tube so that the tab on the lower plate overlaps the upper plate (see

Fig. 1a

below)

2. Secure the clamp ass’y onto the armrest tube using the mounting screws (x2) provided (see

Fig. 1b.

below)

lower clamp

upper

clamping

plate

lower clamp

overlaps plate

Fig. 1b

Fully secure mounting

clamp screws (x2)

Fig. 1a

WARNING! Risk of serious injury or damage

• NEVER use the Multi Axis Support (Arm Pad) as a support when transferring in or out of the seating system.
• DO NOT substitute hardware. All hardware used in the assembly of Motion Concepts seating systems
and accessories is high strength. Use only the hardware provided.

Armrest extension tubes

are also available from Motion

Concepts (sold separately) when longer armrest lengths are
required.

5.0

5.0

SEATING ACCESSORIES & COMFORT ADJUSTMENTS

SEATING ACCESSORIES & COMFORT ADJUSTMENTS

- 62 -

5.5 Multi-Axis Upper Extremity Support

«
...
60
61
62
63
64
...
»

Содержание ULTRA-LOW MAXX UPFRONT MPPS





































































































Отзывы:

Нет отзывов

Похожие инструкции для ULTRA-LOW MAXX UPFRONT MPPS

Бренд: Karma Страницы: 64

Бренд: INTCO Страницы: 4

Бренд: Quickie Страницы: 6

Бренд: Atlas Страницы: 9

PATHRIDER 130 XL

Бренд: Pride Страницы: 48

Бренд: Antar Страницы: 63

Бренд: AAT Страницы: 64

Бренд: Quickie Страницы: 56

Бренд: Unicare Health Страницы: 8

Бренд: Zippie Страницы: 36

Бренд: ARDEA ONE Страницы: 48

Бренд: Paravan Страницы: 74

Бренд: Vermeiren Страницы: 36

Бренд: Aquatec Страницы: 2

Бренд: Aquatec Страницы: 12

FLEXIBIL 10019-10

Бренд: Aquatec Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды