DRIVE MODE:
The ROVI RNet remote joystick functions as the wheelchair drive control when
the joystick is set to one of the available
Drive Profiles
(Drive Mode)
.
There
are 5 pre-programmed drive profiles to choose from on the RNet Remote
Joystick. To scroll through the available drive profiles, press the
Profile Button
on the joystick remote (
1
). The drive profiles are factory pre-set for specific
driving conditions
(e.g.; ramp/curb speed, indoor speed, outdoor speed, etc...)
,
but may be reprogrammed if necessary by a qualified techinican. The speed
within each pre-set drive profile can be further adjusted by pressing the
Speed
Adjust
button on the joystick remote (
2
).
In Drive Mode, the
Joystick Control
is used to drive, steer and stop the
wheelchair (
3
). To drive and steer the wheelchair, press the joystick control in
the direction that you wish to travel. To stop, release the joystick control so
that it returns its home or neutral position.
- 25 -
IMPORTANT!
The following section covers instructions for basic wheelchair drive controls. Please be
certain to read the
RNET Remote /Joystick Manual
and/or the
ROVI Powerbase Owner’s Manual
(provided separately)
for more detailed safety, operating and troubleshooting instructions
.
3.2.2
WHEELCHAIR DRIVE CONTROLS:
Joystick
(Drive)
Control
1
LCD J
OYSTICK
D
ISPLAY
(in
Drive Mode
)
2
speed control display
3
WARNING! Risk of Death, Serious Injury, or Damage
.
An improperly connected joystick could cause loss of power resulting in death, serious injury,
or damage.
•
Ensure the joystick harness is securely connected to the controller
.
DANGER! Risk of Death, Serious Injury, or Damage.
A malfunctioning joystick could cause unintended/erratic movement resulting in death, serious
injury, or damage.
•
If unintended/erratic movement occurs, stop using the wheelchair immediately and contact a qualified technician
.
DANGER! Risk of Death, Serious Injury, or Damage
.
Do not attempt to operate an attendant control joystick with it removed from the seating system
as it could be dropped or be disorienting to operate.
•
To prevent unsafe operating conditions, ensure the attendant control joystick remains in place on the
seating system when operating/driving the wheelchair.
3.0 PROGRAMMING
3.0 PROGRAMMING
AND
AND
OPERATING
OPERATING
YOUR
YOUR
ROVI-UPFRONT MPPS
ROVI-UPFRONT MPPS
Содержание ULTRA-LOW MAXX UPFRONT MPPS
Страница 99: ......