WARNING! Risk of Serious Injury or Damage
Incorrect set up of this wheelchair performed by users/caregivers or unqualified technicians
can result in serious injury or damage.
•
User/Caregivers- DO NOT attempt to set up this wheelchair.
•
Set-up and programming of this wheelchair MUST be performed by a Qualified Technician.
4.0
4.0
ELECTRONICS
ELECTRONICS
Your UL Maxx Upfront (Anterior-Tilt Reach) power positioning system has been specifically programmed/
configured for use prior to delivery. While certain seating system features and functions may be adjusted
by the user and/or attendant following delivery, to ensure your seating system is operating properly and
safely, any programming changes to the electronics must only be performed by a qualified technician.
Our M610 series (mulit-function) seat control boxes are designed for maximum programmability and function
(up to 6 functions)
. All enhanced seat control boxes come standard with our
Remote Attendant Control
.
IMPORTANT!
The M-Series seat controls are equipped with built-in over-current protection. In the event
that a current spike occurs during operation of your power positioning system, the controller is designed to
go into a temporary shutdown to prevent damage to the electronics. If you experience a repeated controller
shutdown, please contact your service provider or our Technical Service Department for assistance.
Remote
Attendant Control
M610 Series Seat Control
(3-6 Function)
(includes Remote Attendant Control )
The seat control box is the brain behind our Power Positioning Systems. It is responsible for controlling the
available motor functions
(i.e.; tilt, recline, elevate, etc..),
as well as signaling the associated safety limits and
lockouts (
i.e.; DLO Limit, Reduced Speed Drive, etc..
). Motion Concepts uses state of the art electronics to
operate our power positioning systems and ensure the safe operation of your wheelchair system. The Upfront
(Anterior-Tilt Reach) power positioning system is configured with our enhanced (
M610 series
) electronics, in
combination with
Rovi RNet
power base electronics.
4.1 Seat Control Box
4.1.1 M610 SERIES SEAT CONTROL
4.1.2 REMOTE ATTENDANT CONTROL:
The Remote Attendant Control serves dual purpose as both an attendant control box for the available seat func-
tions, as well as a hand-held electronics programmer for certain seating system features.
In
Standard Mode
the Remote Attendant Control functions as an attendant control switch/display for the
power positioning system.
In
Program Mode
, the Remote Attendant Control functions as a hand-held programmer to configure various
seating system parameters/limits. Programming access is restricted to qualified Technical Service personnel.
NOTE:
When not in use, the screen display on the Remote is designed to enter into sleep mode after 10
sec. Pressing any button on the remote will re-awaken the display.
There are 3 key components in our system electronics:
Seat Control Box
,
Wiring Harnesses
&
Limit Switches/
Sensors.
The following sections provide information/instructions related to each of these components.
- 41 -
Содержание ULTRA-LOW MAXX UPFRONT MPPS
Страница 99: ......