Morita SIGNO G20 Скачать руководство пользователя страница 50

Страница: 50 / 98

(5)Waste Container Stand

This is a stand for placing a waste container on the table. Ethanol disinfec-
tion and autoclave sterilization(135c) are possible.

1)Assembly of waste container

Use the exclusive paper cup and the star cap accessories.
Fit the star cap into the top of the paper cup to make a waste con-
tainer.
Put the edge of the paper cup and the groove of the star cap together
and then press the cap on the cup slowly.

2)Set up

a)Set the waste container stand to the waste container.
Insert the bottom of the paper cup to the waste container stand
straight.

Paper cup will be deformed if the cap is pressed
too strongly or inserted obliquely.

b)Place it on the table.

　　Star Cap

Paper Cup

Waste container

stand

Tray Handle

[5]Operation 9.

(4)Tray Handle

Disinfect the handle by wiping it with ethanol.

3)Replacement

Dispose of an old cup in a prescribed manner and replace it with a new
one timely. Pull the cup out straight, holding the waste container stand.

If you grasp the cup hard, the contents of the cup
will spout.

When you run out of cups or caps, order a new supply from your local
dealer or J.Morita Corp.

ADVICE

Содержание SIGNO G20



































































































Результаты поиска

Содержание SIGNO G20

Отзывы:

Morita SIGNO G20, Руководство по эксплуатации, Страница: 50 / 98

Результаты поиска

Содержание SIGNO G20

Отзывы: