18
DIisplay
Instrument Pick Up Indicators
Speed Rotation Spray ON/OFF
Range Direction
Hand piece Light
ON/OFF
[5]Operation 3.
The indicator lights for these switches show if they are on or off or what the
setting is.
Settings can all stored in memory.
Always stop using an instrument before changing any
settings.
>>Changing settings while an instrument is actually in use
could result in a serious accident.
WARNING
(4)Instrument Switches and Displays
Lamps lights up for instrument
that can be used
＜ Standard Useage Example ＞
1)Instrument Selection
Once an instrument is taken out from the holder, the instrument is
recognized as being selected, and then it can be used. (except three-
way syringe) to the instrument until it is put back to the holder.
A circuit of an instrument being used is displayed on the instrument
pick up indicators. Refer to the right illustration.)
For your information, the indicator does not display actual arrange-
ment of instruments, depending on specification.
2) Display
The display shows various settings and information.
The following are the main functions:
>>When all instruments are all put away
(A)Shows lock status (When chair lock is set on: Refer to the section
5))
>>When an instrument is selected
(B)Shows instrument setting(HS/LS)
(C)Shows power of ultrasonic scaler* (when equipped with ultrasonic
scaler : Refer to the section 4))
>>When a setting are being done
(D)Shows the setting being selected(HP/CH/Setting number)