45
[5]Operation 8.
(1)Auto Filler
Do not bump the fountain or expose it to other types of physical shocks or
excessive stress.
>>This could damage the fountain and cause it to stop working.
Never run water through the fountain if its nozzle has been removed.
>>This would result in water shooting straight up in the air.
If the sensor is dirty, wipe it carefully with a dry cloth.
>>Otherwise, the auto filler will not work right.
8.Water Fountain
CAUTION
CAUTION
1)Auto Cup Filling
Place a cup on the stand. (The cup can be of any material, paper,
metal, etc.) The cup will be detected and filled to the specified level.
If the cup is already full when it is detected, a little water will run and
then stop.
Do not use transparent or semi-transparent cups.
They may not be detected by the sensor.
To prevent accidental activation, there is a 1 sec-
ond delay after the cup is set in place before the
water starts to run. Put the cup in place carefully.
2)Set Cup Water Level
This is set at the factory using the small dental cup as a standard.
It can be changed in the following way:
a)The adjustment screw is on the basin unit panel.
Use a small flat head screwdriver.
.
b)Follow the marking for the screw to adjust the level.
c)Put a cup in place and check the level.
CHECK
ADVICE
Water Level Start Finished
Low High
Auto Filler Auto Filler
Water Adjustment Check Lamp
Sensor
Cup Stand