Morita SIGNO G20 Скачать руководство пользователя страница 23

Страница: 23 / 98

[5]Operation 4.

4. Assistant’s Switch Panel

    Illustration above shows the switches on the assistant’s switch panel.
    A switch is disabled if the unit is not equipped with the corresponding
    function.

(1)Auto-positioning Switches

    These are used in the same way as those on the dentist’s side.
    Refer to section [5] 3. (1) of this manual.
    1)

Position 1 and position 2.

Position setting cannot be changed with the assistant’s
side switch panel. It can be changed with the dentist’s
side switch panel.

(1)Auto-positioning
Switches

(4)Operating Light
on/off Switch *

(5)Flushing Switch*

(2)Manual Cup Filling Switch

(3)Vacuum tank Auto-cleaning
Switch*

ADVICE

(2)Manual Cup Filling Switch

Press this to fill cups manually.
Water flows only while this switch is being held down.

Make sure a cup is in place. Otherwise, water might
spill and be splashed around the area.

(3)Vacuum Tank Auto Cleaning Switch

This only works if the unit has this function. **

Press this switch to automatically clean the vacuum tank.
For details refer to [5] 7. in this manual.

(4)Operating Light On/Off Switch

Press this switch to turn the light on and off.

Only for units that have the auto light function. **

ADVICE

**: Disabled if unit is not equipped with this function.

*:option

Содержание SIGNO G20



































































































Результаты поиска

Содержание SIGNO G20

Отзывы:

Morita SIGNO G20, Руководство по эксплуатации, Страница: 23 / 98

Результаты поиска

Содержание SIGNO G20

Отзывы: