Morita SIGNO G20 Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 98

Morita SIGNO G20 Скачать руководство пользователя страница 22

22

2) Hand piece Lock

This will disable the selected dentist’s instrument.
Use this if an instrument has been disconnected.
The locked instrument cannot be used and will not respond if it is
picked up.

a)Press the set switch to bring up the HP lock display.

b)Press a switch corresponding to a handpiece to be locked and then
select ON(locked) or OFF(unlocked).

While a handpiece is unlocked, the lamp of the
instrument pick up indicators lights up.
For your information, a lamp of the instrument pick
up indicators corresponding to a circuit without
handpiece lights up at all times.

＜ Standard Useage Example ＞

[5]Operation 3.

Hand piece Lock
Display

CHECK

c)Pick up one of the instruments at dentist’s side to discontinue
   setting. The display turns normal if the instrument is put back to the
   instrument holder again.
   When you cancel chair lock or set it again, start again from the a)
   above.

２　　　　３　　　４　　　５

Lock : Lamp Brinks

Lock ON/OFF

«
...
20
21
22
23
24
...
»

Содержание SIGNO G20



































































































Отзывы:

Нет отзывов