24
[5]Operation 4.5.
(5)Flushing Switch*
This only works if the unit is equipped with a flushing device.**
Press this switch to flush the water inside the unit out through the main
tubes.
For details, refer to [5] 7. of this manual.
Flushing Lamp
Flushing Switch
5. Instrument Holders
Before moving the seat or back rest, ensure the instrument holder has been
clear and will not be hit by them.
>>Otherwise, the equipment could be seriously damaged.
To adjust the holder’s position, grip the holder or its arm firmly and turn it slowly
and carefully.
When adjusting the position or angle of an instrument holder, grip the holder
or its arm firmly and move it carefully.
>>Do not grip the instrument section or use excessive force; this could seriously
damage the holder.
The act of putting a strain is not allowed for Main tubes.
(When the table draws
it or strongly pulls while cleaning.)
>>This could result in air or water leakage as well as serious damage.
CAUTION