12
Main Switch
<Chair housing>
Main Switch
○ Ｉ
ＯＦＦ
ＯＮ
1. Main Switch
CAUTION
Never bump or bang the equipment or expose it to excessive vibration while
the main switch is on.
>>Doing so could cause an accident resulting in injury or damage.
Always turn the main switch off after treatment, during breaks in treatment
or whenever the unit is not in actual use.
>>Otherwise, an accident could occur resulting in injury or damage.
Turn the main switch off before using an electric scalpel in the immediate
vicinity of the equipment.
>>Otherwise, electromagnetic waves emitted by the electric scalpel could cause
the equipment to operate in a sporadic or abnormal way resulting in an accident
causing injury or damage.
[5]Operation 1.
(1)Operation
The main switch is located on the lower part of the housing. Press it to turn
the unit on. The lamp lights up when it is turned on and all the instruments
etc. can then be operated. Press it again to turn the unit off.
(2)Save Power Function
For both safety and economy, the unit automatically enters the save
power mode if it has not been used for the set period of time.
In the save power mode,
>>The operating light goes out.(When equipped with Auto light*)
>>The operating light and its indicator go out.
>>The power for chair operation
>>The water is turned off.
When in save power mode, normal operation can be restored by pressing
any of the dentist or assistant’s operation switches, stepping of the foot
pedal, or picking up an instrument.
Time to save power mode can be changed.(60 or 120 minutes) Please
contact the dealer whom you purchased the dental treatment unit from or
a nearby J.Morita Corporation if you would like to change the setting.
When starting the operation of the dental treatment unit, open the air and
water supply valves, (See section [5]18 in this manual) and then turn on
the main switch.