42
[5]Operation 7.
(3)Water and Air Snap On Connectors
Ensure these connections are correctly made before using.
>>If the connection is not correctly fixed in place, water or air could leak or the joint
could come off.
CAUTION
If necessary, a supply of water or air can be drawn from this connection on
the basin unit panel. Use the special snap-on joints* to draw water or air
from their connections.
1)Use
a)Connect the joint to the snap on connection. Push it all the way in
until it clicks into place.
b)Water flow can be adjusted with the valve above the connector.
Air will flow at a steady rate depending on the pressure inside the
chair unit.
c)Take the water joint off by pressing the release button and pulling it
out. Disconnect the air connector by push the ring forward and pulli-
ng it off.
Grip the connectors firmly to disconnect them.
Internal pressure could give them some spring when
they are disconnected.
Please put some Vaseline on the top of joint,
smoothly carry out the maintenance per month and
be careful do not scraps the O ring.
ADVICE
Water Connector
Water Adjustment Knob
*:option