Monaco Executive 2001, Руководство пользователя

Страница: 140 / 269

Electrical Systems
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
5 • 1 4 0
EXECUTIVE
This is an alternate field of main system status. To access the various
meters available, depress the UP arrow button and hold for five seconds. The
RC7 remote will beep. Release the button. The Avg Shunt Amps will be
displayed. This field area includes:
Avg Shunt Amps:
This measures the DC current either charging or discharging. Most of the
house DC current usage is monitored by the inverter.
Battery Voltage:
This monitors the house battery voltage.
Inv/Chg Current:
This measures the total pass through AC current usage.
Inverter Output VAC:
This monitors the AC output voltage while the unit is inverting.
AC Input Amps:
The inverter uses a double pole pass through relay. This measures current
consumption through the Hot 1 terminal.
Battery Temperature:
This monitors counts of the battery temperature sensor (BTS). Counts are
measured impulses which the inverter uses to calculate the battery case
temperature. The charging voltage is adjusted to optimum values.
Xformer Temp:
This monitors the transformer temperature which is measured in counts.
Higher count readings are registering lower temperatures.
FET Temp:
This monitors the Field Effect Transistor temperature which is measured in
counts.
Est Batt Cap:
This estimates the battery bank capacity in amp hours (Ahrs). Charging and
discharging on a cyclic basis will give an approximate indication of the
battery capacity in amp hours. Observe the reading and multiply by eight to
obtain an approximate reserve capacity. This figure is only approximate and
will change with cyclic use.
Meter Menu