Mitsubishi Electric FR-E710W-0.1K, Инструкция по эксплуатации

Страница: 30 / 349

21
2
WIRING
Main circuit terminal specifications
(3) Total wiring length
The overall wiring length for connection of a single motor or multiple motors should be within the value in the table
below.
When driving a 400V class motor by the inverter, surge voltages attributable to the wiring constants may occur at the
motor terminals, deteriorating the insulation of the motor. (Refer to page 96)
Pr. 72 PWM frequency selection
Setting
(carrier frequency)
0.1K 0.2K 0.4K 0.75K 1.5K 2.2K
3.7K
or More
1 (1kHz) or less
100V class,
200V class
200m 200m 300m 500m 500m 500m 500m
400V class - - 200m 200m 300m 500m 500m
2 to15
(2kHz to 14.5kHz)
100V class,
200V class
30m 100m 200m 300m 500m 500m 500m
400V class - - 30m 100m 200m 300m 500m
Total wiring length (3.7K(SC) or more)
NOTE
Especially for long-distance wiring, the inverter may be affected by a charging current caused by the stray
capacitances of the wiring, leading to a malfunction of the overcurrent protective function, fast response current limit
function, or stall prevention function or a malfunction or fault of the equipment connected on the inverter output side.
If malfunction of fast-response current limit function occurs, disable this function. If malfunction of stall prevention
function occurs, increase the stall level.
(Refer to page 92 for Pr. 22 Stall prevention operation level
and
Pr. 156 Stall prevention
operation selection )
Refer to
page 174
for details of
Pr. 72 PWM frequency selection
.
Refer to the manual of the option
for details of surge voltage
suppression filter (FR-ASF-H/FR-BMF-H).
When using the automatic restart after instantaneous power failure function with wiring length exceeding 100m,
select without frequency search (
Pr. 162 = "1, 11"). ( Refer to page 162)
500m or less
300m
300m
300m+300m=600m