Mitsubishi Electric FR-D710W-0.1K, Инструкция по эксплуатации

Страница: 73 / 313

Parameter list Parameter list
70
4
P
A
RAMETE
R
S
Parameter List
Clear p
a
rameter
s
Initial value change list
Pr.CL Parameter clear 0, 1 1 0 248 Pr.CL — FC — — — — — —
ALLC All parameter clear 0, 1 1 0
248
ALLC — FC — — — — — —
Er.CL Faults history clear 0, 1 1 0 250 Er.CL — F4 — — — — — —
Pr.CH Initial value change list — — — 249 Pr.CH — — — — — — — —
∗1
Differ according to capacities.
6%: 0.75K or lower
4%: 1.5K to 3.7K
3%: 5.5K, 7.5K
2%: 11K, 15K
∗2
Differ according to capacities.
5s: 3.7K or lower
10s: 5.5K, 7.5K
15s: 11K, 15K
∗3
Differ according to capacities.
6%: 0.1K, 0.2K
4%: 0.4K to 7.5K
2%: 11K, 15K
∗4
Write is disabled in the communication mode (Network operation mode) from the PU connector.
∗5
The initial value differs according to the voltage class. (100V class, 200V class / 400V class)
∗6
Set this parameter when calibrating the operation panel built-in potentiometer for the FR-E500 series operation panel (PA02) connected with cable.
∗7
The parameter number in parentheses is the one for use with the operation panel (PA02) for the FR-E500 series or parameter unit (FR-PU04/FR-PU07).
∗8
These parameters are communication parameters that are not cleared when parameter clear (all clear) is executed from RS-485 communication. ( Refer to
page 179 for RS-485 communication)
∗9
Available only for the three-phase power input model.
Func-
tion
Parameter Name Setting Range
Minimum
Setting
Increments
Initial
Value
Refer
to
Page
Customer
Setting
Parameter Remarks
Instruction Code
Control Mode-based
Correspondence Table
Parameter
Read Write Extended Copy Clear All clear
V/F V/F V/F
GP MFVC GP MFVC GP MFVC