Mitsubishi Electric FR-D710W-0.1K, Инструкция по эксплуатации

Страница: 11 / 313

2
Product checking and parts identification
1.1 Product checking and parts identification
Unpack the inverter and check the capacity plate on the front cover and the rating plate on the inverter side face to ensure that
the product agrees with your order and the inverter is intact.
z Inverter model
z
Accessory
· Fan cover fixing screws (M3
×
35mm)
These screws are necessary for compliance with the EU Directive. ( Refer to the Instruction Manual (Basic))
z
SERIAL number check
Capacity Quantity
1.5K to 3.7K 1
5.5K to 15K 2
Rating plate example
The SERIAL consists of one symbol, two characters indicating production year and month, and six
characters indicating control number.
The last digit of the production year is indicated as the Year, and the Month is indicated by 1 to 9,
X (October), Y (November), or Z (December.)
Symbol Year Month Control number
SERIAL (Serial No.)
Capacity plate
Inverter model
Serial number
Rating plate
FR-D740-1.5K
Inverter model
Input rating
Output rating
Serial number
1.5K
DATE:XXXX-XX
Production year and month
FR -
-
Symbol Voltage class
D740 1.5
Represents the
inverter capacity [kW]
K
D720
Three-phase 200V class
D740 Three-phase 400V class
D720S
Single-phase 200V class
D710W
Single-phase 100V class
Control circuit terminal
block
(Refer to page 20)
Control logic switchover
jumper connector
(Refer to page 22)
Combed shaped
wiring cover
(Refer to page 7)
Main circuit
terminal block
(Refer to page 15)
Front cover
(Refer to page 5)
PU connector
(Refer to page 29)
Voltage/current input switch
(Refer to page 20)
Operation panel
(Refer to page 54)
Cooling fan
(Refer to page 278)