Minolta CF5001, Руководство пользователя

Страница: 403 / 432

[13] Memory Switch Setting (continued)
14-39
Procedure
1 Touch [13] Memory switch setting to display the Memory Switch Setting
Screen.
2 To select the desired item, touch the arrow keys (
c
) and (
d
) at the right of the
Memory Switch Setting Screen to highlight it.
To scroll, touch the arrow keys at the lower left corner of the screen.
3 To change the setting of the highlighted item, touch Change Setting Contents
repeatedly till the desired setting is displayed.
Repeat above steps
2 to 3 to make several changes in succession.
4 Touch PREVIOUS SCREEN on the Memory Switch Setting Screen to restore the
Key Operator Mode Screen.
The following functions can be provided by the Memory Switch settings.
[1] Auto reset timer
Set the reset interval starting from the completion of a copying job until the machine
returns to the initial condition.
[2] AUTO RESET key function
Set the condition of the following modes when [ AUTO RESET ] is pressed: Copy
mode, Copy density, Magnification, Tray selection.
[3] RADF-Original effect
Set the machine condition when original is set on RADF in non-RADF mode with
RADF unit closed.
[4] Job memory auto recall (30)
Job memory number 30 is automatically recalled when power is turned on or when
Auto-reset is restored.
This job recall function works only when Job number 30 is registered.
[5] Finisher mode by Full-auto
Set the Output Mode to be recalled when [ AUTO RESET ] is pressed.
[6] Initial by Key counter insert
Set the machine to return to the initial state when Key counter is inserted.
[7] Erasure outside area of original
Set the machine to delete the outside area of originals.
[8] RADF frame erasure selection
Set Frame erasure to function anytime in RADF mode.
[9] Automatic tray switching
When paper is depleted during a copying job, the copier continues copying by
switching to another tray that contains the same size paper.
[10] Platen APS
The copier automatically selects the same size copy paper as the original placed on
the platen glass. (In reduction or enlargement mode, an appropriate paper size is
selected according to the ratio selected.)
[11] RADF APS
The copier automatically selects the same size copy paper as the original placed on
the RADF. (In reduction/enlargement mode, an appropriate paper size is selected
according to the ratio.)