manualshive.com logo in svg

Minebea Sartorius Intec Maxxis 4 PR 5500, Инструкция по эксплуатации инструмента

Поделиться
Скачать
Minebea Sartorius Intec Maxxis 4 PR 5500 Скачать руководство пользователя страница 46

Device Installation 

PR 5500 Instrument Manual

EN-42 Sartorius

4.3.4  SD Card Slot

The internal SD card slot is located on the back of the device. It comes with an appropriate SD card. The SD card 
is only used for storage; it is not used for data transfers.

Note

Only Sartorius Intec-supplied SD cards may be used. There is no warranty for third-party 
cards.

The following data are saved to the SD card:

 

-

The backup directory for the configuration and database

 

-

A copy of the current version of the BIOS, firmware and application

 

-

A copy of the delivery version of the BIOS, firmware and application

 

-

Manuals

You also have the option of saving application data.

The SD card is a fixed component of the device.

 

-

The SD card may only be removed together with the SIL chip during servicing 

(replacing a defective device, see Chapter 13.7).

 

-

The SD card may not be used for data transfers.

 

-

The SD card may not be used in Notebook/PC.

! 

Caution

The SD card is protected by a battery in case of a power failure, i.e. the current process running (e.g. reading 
data) is carried out and completed.

Содержание Sartorius Intec Maxxis 4 PR 5500
























































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды