Minebea Sartorius Intec Maxxis 4 PR 5500, Инструкция по эксплуатации инструмента

Страница: 24 / 407

Process Controller PR 5500 Instrument Manual
EN-14 Sartorius
Value type/Polarity sign Zero/Standstill/Dosing/Monitor. Symbols Mass unit
B Gross weight Weight value
standstill !
Value not permissible in legal metrology (e.g. 10-fold resolution, deactived load cell)
t
kg
G Gross weight in NTEP or
NSC mode U The gross weight
value is within ±¼ d
of zero g
mg
lb
NET Net weight
(Net = gross - tare) Filling mode:
flashes when filling is
“held”; rapid flashing
indicates “error” oz
T Tare weight R1 Range 1
PT Preset tare
not tared R2 Range 2
R3 Range 3
no indi-
cation - Test value
- Gross, not tared
Pendeo load cells:
plausibility monito-
ring; average value
deviation of each load
cell WP-A Weighing point A
User
additional weight value,
application-specific
function
Pendeo load cells:
Temperature control;
1…n load cells are
above/below the per-
missible temperature Max Maximum capacity
(weighing range)
Setp Min Minimum weight
Diff
+
Positiv value
–
Negativ value
Status icons in the info line
Icon Description
Remote control via VNC (Virtual Network Computing) is active.
- The clock battery is empty.
- The standby battery is empty.
The standby battery is too hot and is not charging. If this does not go away, then the ambient
temperature must be checked, see Chapter 3.4.3.2.
- A USB device has been connected that is not supported.
- The max. current of i
max
= 200 mA has been exceeded.
Check newly connected devices.
USB stick recognized and ready for use.
Stick is in use and may
not
be removed.
IP address conflict in network settings