manualshive.com logo in svg

Minebea Sartorius Intec Maxxis 4 PR 5500, Инструкция по эксплуатации инструмента

Поделиться
Скачать
Minebea Sartorius Intec Maxxis 4 PR 5500 Скачать руководство пользователя страница 405

PR 5500 Instrument Manual 

Appendix

Sartorius EN-395

13.8  Replacing the SD Card

Note

Only Sartorius-supplied SD cards may be used. There is no warranty for third-party cards.

t

t

Export the data from the device onto a USB stick, 
see Chapter 6.1.4.1.

t

t

Remove the defective SD card.

t

t

Insert the new SD card.

t

t

Only if the new card has already been used in 
another device: Press the STOP and EXIT keys at 
the same time to trigger a cold start.

t

t

Only if the new card has already been used in 
another device: Select and confirm the menu item 
[Use SD card without updating software].

t

t

Import the data from the USB stick into the 
device, see Chapter 6.1.5.1.

Содержание Sartorius Intec Maxxis 4 PR 5500
























































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды