Mindray Imagyn 7, Руководство оператора

Страница: 246 / 492

8 - 6 Operator’s Manual
8 Elastography
The bigger the level is, the higher the smooth effect achieves.
Persistence
This feature is used to superimpose and average adjacent elasto images, so as to optimize the
image.
Tap [Persistence] on the touch screen to adjust the parameter.
The bigger the value is, the higher the frame optimization effect achieves.
The persistence function can remove image noise and optimize image effect to gain a more detailed
image.
FS Mode
This feature is used to improve the frame rate. Tap [FS Mode] on the touch screen to enable the
function and the button will be highlighted.
Invert
Invert the map to satisfy the different doctors to define the benign lesion or malignant lesion.
Tap [Invert] to enable the function (the soft key is highlighted).
iLayering
To increase the layer display in elasto images. Tap [iLayering] to enable the function.
Filter
To filter the noise of the elasto image.
Tap [Filter]. The higher the level is, the smaller the noise of the elasto image becomes, and the
clearer the edge of the field target appears.
The system restarts scanning B image and E image after the filtering is completed.
Map Position
This feature is used to adjust the up/down position of the map.
Tap [Map Position] on the touch screen to adjust the parameter.
Select/Bad
It is used to remove the desired frame from stress curve. The removed frame will not be calculated
in STE indices.
Rotate the knob under [Select/Bad] to select the desired frame, and press the knob to set the desired
frame to “On”.
8.2.3
STE-HiRE
Measuring
Press <Caliper> to enter general measurements. You can perform the measurements of
Elastography, Elas. Ratio, Directional Ratio, Elas. Hist and etc.
Press <Measure> to enter application measurement. You can perform measurements on Isthmus
and Mass, etc.
For details, see “Advanced Volume”.
8.2.4 Cine Review
Press <Freeze> to freeze the image and enter cine review state.
Or, click the cine to enter the cine review state.