Mindray Imagyn 7, Руководство оператора

Страница: 273 / 492

11 Stress Echo
Operator’s Manual 11 - 3
To select “preferred” loops:
1.
Use the <Update> key according to tips in the trackball hint area or select [Select] to enter the
Select Mode, or the system enters the Select Mode directly after the acquisition is finished.
2. Select the loop. Use the buttons displayed during Select Mode to designate another loop or
another view for display.
– Use [Stages XXX] or [Views XXX] to select the target stage/view.
– Single-click a clip to select the clip for current stage/view and zoom in the clip to the full-
screen.
– Double-click a clip. The clip will be magnified.
– Tap [First/Last] or [Previous/Next] to display another loop in the current view.
3. Select the stage and view to display all loops for the view and then continue designating the
“preferred” loop for each displayed view until all views are completed.
Description of select mode controls:
Selection Description
Stages XXX To select a stage.
Views XXX To select a view.
Acquire/Select/ Review/
WMS To switch the mode status.
1. Clip/2. Clip/3. Clip/4.
Clip For selecting views in the selected stage.
Next Next four Clips.
Previous Previous four Clips.
First Go to “first” Clips.
Last Go to “last” Clips.
Play Click to play/stop cine play.
Prev frame See previous frame of the cine file.
Next frame See next frame of the cine file.
First frame See first frame of the cine file.
Last frame See last frame of the cine file.
Speed decrease/Speed
increase Decreases or increases playback speed.
Text Function that turns the screen graphic text “On” or “Off”. Information
includes: name of level, name of view, heart rate, time stamp
acquisition, timers, frame slider, loop ID, clip control. For the cine
without distributed view, the name of level and name of view are
displayed in “--”.
Apply edit all Clip edit applied to all clips taken.
Clip Length Specify the clip segments: systole, diastole, full cycle or user-defined.
Bookmark For continuous acquisition, when the bookmark is set to “On”, only the
selected loops for the current view can be displayed.
Delete Unselected Delete clips that are not selected. If selected, the system will delete all
clips that are not selected after the exam is ended.