50
Pellerin Milnor Corporation
The
Ready
light on the storage device will remain off until the
clearing process is complete. The clearing process is fully auto-
matic and requires no user action beyond turning the key to
Clear
Memory
and returning it to the normal position.
When the
Ready
light comes on again (after about 45 seconds),
the storage device is ready to accept data from the machine
controller.
CAUTION:
Ensure Data Integrity —
Clear the memory storage device before saving
data to it.
�
The memory storage device will hold all programming and configura-
tion data for one machine, and can be re-used many times. However, this
device will only accept new data when it's empty.
�
Attempts to save data to a storage device that has not been cleared will
fail,
even if the procedure appears successful
.
Display or Action
Explanation
RUN PROGRAM00 OK TO
POWER OFF
When the
Run Program
display appears, switch from
Run
mode
to
Program
mode.
Turn the
Run/Program
keyswitch on the machine controller(s)
from the
Run
position to the
Program
position.
PROGRAM
0
MENU
OK
TURN KEY TO RUN
Controller display when the
Run/Program
keyswitch is set to
(
Program
position).
Scroll down in the
Program
menu to
Data Transfer
. If two ma-
chines are connected together, this is required at both machines.
PROGRAM
4
MENU
DATA TRANSFER
This is the
Data Transfer
menu selection. Follow the procedure
in
2.3.6.2: Saving Data from the Machine to the Storage Device
for making a copy of good data
from the machine controller. Refer to
Data to the Machine from the Storage Device or Another Ma-
chine, page 52
for instructions on restoring previously saved data
from the storage device (or another machine) to the machine con-
troller, as might be required after changing the processor board.
2.3.6.2
Saving Data from the Machine to the Storage Device or a
Second Machine
BNCJUP05.R02 0000195354 C.2 D.2 A.6 1/2/20 1:16 PM Released
Display or Action
Explanation
Confirms selection and advances to the
Data Transfer
menu.
DOWN LOAD DEVICES
0
MACHINE<==>MACHINE
This is the
Data Download
sub-menu. Select the desired type of
data transfer here.
DATA TRANSFER
0
SLAVE
There are two selections available in the
Data Transfer
menu:
0=
Slave
and
1=Master
.
Содержание E-P Plus
Страница 2: ......