Mesutronic METRON 07 C, Перевод оригинального руководства пользователя

Страница: 66 / 84

-64- Errors and Problems
Display unit messages (3-XXX)
3-001 Error: „No connection to control unit“
Check the Link2 LED. Check the cable connection.
3-002 Error: „No connection to sensor unit“
Check the Link1 LED. Check the cable connection.
3-003 Error: „No connection for signal tracer“
Check the Link1 LED. Check the cable connection.
3-004 Error: „System monitoring: 24V voltage“
The voltage is not within the tolerance range. Contact the service department.
3-005 Error: „System monitoring: 10V voltage “
The voltage is not within the tolerance range. Contact the service department.
3-006 Error: „System monitoring: 5V voltage “
The voltage is not within the tolerance range. Contact the service department.
3-007 Error: „System monitoring: 3.3V voltage “
The voltage is not within the tolerance range. Contact the service department.
3-008 Error: „System monitoring: 2.5V voltage “
The voltage is not within the tolerance range. Contact the service department.
3-009 Error: „System monitoring: 1.8V voltage Lan Core“
The voltage is not within the tolerance range. Contact the service department.
3-010 Error: „System monitoring: 1.8V voltage Lan Pll“
The voltage is not within the tolerance range. Contact the service department.
3-011 Error: „System monitoring: 1.2V voltage“
The voltage is not within the tolerance range. Contact the service department.
3-012: reserved