Mesutronic METRON 07 C, Перевод оригинального руководства пользователя

Страница: 64 / 84

-62- Errors and Problems
Sensor unit messages (2-XXX)
2-001 Error: „System monitoring: Transmitter overloaded“
The power stage of the transmitter is overloaded.
Examine the transmitter cable for short-circuits and check the connections and contacts in the transmitter
connection box.
2-002 Error: „System monitoring: Transmitter disconnected“
The power stage of the transmitter is not loaded.
Examine the transmitter cable for short-circuits and check the connections and contacts in the transmitter
connection box.
2-003 Error: „System monitoring: 24VD voltage“
The voltage is not within the tolerance range. Contact the service department.
2-004 Error: „System monitoring: +15V voltage “
The voltage is not within the tolerance range. Contact the service department.
2-005 Error: „System monitoring: -15V voltage “
The voltage is not within the tolerance range. Contact the service department.
2-006 Error: „System monitoring: 3.3VA voltage “
The voltage is not within the tolerance range. Contact the service department.
2-007 Error: „System monitoring: 1.2VD voltage “
The voltage is not within the tolerance range. Contact the service department.
2-008 Error: „System monitoring: +8V voltage “
The voltage is not within the tolerance range. Contact the service department.
2-009 Error: „System monitoring: -8V voltage “
The voltage is not within the tolerance range. Contact the service department.
2-010 Error: „System monitoring: +12V voltage “
The voltage is not within the tolerance range. Contact the service department.
2-011 Error: „System monitoring: -12V voltage “
The voltage is not within the tolerance range. Contact the service department.