Mesutronic METRON 07 C, Перевод оригинального руководства пользователя

Страница: 67 / 84

-65- Errors and Problems
3-013 Warning: „mesuNET: No connection to the server“
The log data (mesuNET) buffered on the unit concerned exceeds a size of 3 KB (approx. 40 messages).
Check the Link0 -LED. Check the connection.
3-014 Error: „mesuNET: No connection to the server –
loss of data“
The log data (mesuNET) buffered on the unit concerned exceeds a size of 100 KB (approx. 1300 messages).
In this case no further data will be buffered.
Check the Link0 -LED. Check the connection.
3-015 Error: „Detector test failed: timeout“
No metal signal was detected over the duration of the detector test.
see chapter Adjustment  Operating level QM  Detector test
3-016 Error: „Detector test failed: Tolerance“
This message appears if the result of the comparison of the determined test body and the learned test body
(with assigned tolerances) is negative.
3-017 Warning: „Password expired“
Please assign a new password.
see chapter Adjustment  Operating level 1  Change password
3-018 Notice: „Protocol size near maximum“
The size of the log database exceeds 19500 entries. Please backup and delete logs. The log database is
limited to 20000 entries.
see chapter Settings  Operating level QM  Protocol
3-019 Warning: „Protocol size at maximum“
The size of the log database has reached 20000. 1000 old entries will be deleted.
The log database is limited to 20000 entries.
see chapter Settings  Operating level QM  Protocol