Mesutronic METRON 07 C, Перевод оригинального руководства пользователя

Страница: 46 / 84

-44- Adjustment
Product memory (Create product)
The name , detection threshold , ejection time , ejection delay , learning angle and frequency for a
particular product are linked together in the Product memory . Changing the product therefore also results in
a change of the detection threshold, ejection time, ejection delay, learning angle and frequency. The product
list can be sorted according to product number (1-9) or product name (A-Z).
New Adds a new product memory on the basis of the currently selected product memory.
Copy Copies the values linked with the product memory from one product memory to another.
Edit Changes the name of the selected product memory.
Delete
Deletes the product memory selected on the left.
Reject counter
Select ‘Reset’ in order to set the metal counter to zero
see chapter Adjustment  Operating level 1  Reject counter
Reject parameters relais 1/active 1
Position (switching delay)
The number set here represents the time delay between detection of the metal part in the detector coil and
output at the outputs. The metal delay can be adjusted independently of the
Reset mode .
see chapter Settings  Operating level 2  Reject parameters  Reset mode
The ejection delay can be set between 0 (OFF) and 30 seconds.
In the case of pre-adjusted machines with a rotary encoder or defined speed, the position is entered in
millimetres (mm).
Period
Period is the time, within which the rejection mechanism remains in the scrap rejection position once metal
has been detected.
The period can be chosen from 0.1 to 30 seconds.
You can find the optimal setting, by starting with an absolutely safe period, and reducing the
value step by step. The first time that the metal part is not rejected, you increase the value,
adding a further safety leeway.
