Mesutronic METRON 07 C, Перевод оригинального руководства пользователя

Страница: 19 / 84

-17- Actuation
General
It is our company’s goal to ship the metal detector to the customer with as many pre-configured settings as
possible. If the machine is shipped with factory default settings, it should be noted, that the factory defaults
are the best possible compromise between maximally attainable detection precision and lowest possible
sensitivity to interference. The data sheet sensitivities are achieved with detection threshold settings between
20 and 10.
In order to adapt the settings to your own needs, a schematic sequence is provided below in which the start
up should ideally take place. Only the sequence is described. The individual explanations of the menu items
must be read in the operating instructions.
Safety procedures before taking the device into operation
Before actuating the metal detector at least the following parts of the device must be
checked:

Is the device damaged anywhere?

Are the electric ports and mains undamaged?

Are all protective covers fitted and free of damage?

Are all pneumatic supplies and mains undamaged (if installed)?
The device can start if everything is perfect.
Danger due to incorrect assembly and commissioning!
Assembly and commissioning require trained technical personnel with sufficient
experience. Errors made during assembly can lead to life-threatening situations or
result in considerable material damages.
Actuation

3