Mesutronic METRON 07 C, Перевод оригинального руководства пользователя

Страница: 38 / 84

-36- Operation
1
2
5. imagePHASE: Display for showing the measuring signal
With imagePHASE you can achieve high detection accuracy through the optimum
identification of the product.
The imagePHASE makes use of the effect that the measuring signal must move within certain
limits (envelope) The envelope (
1 ) identifies the product to be examined. If the measuring
signal ( 2 ) lies outside the envelope, a metal alarm is triggered
The learned envelope of the product always remains
visible. The measuring signal is slowly faded out after a
certain time.Measured values inside the envelope are
displayed in a different colour to those outside the
envelope. Since it is often difficult in the border area to
determine whether the measuring signal lies outside the
envelope, these areas are additionally highlighted in
colour
Please note! An unstable and strongly oscillating signal, which touches the metal switching thresholds,
could have the following reasons:

Peripheral interference
Solution:
Localise and remove source of interference or reduce sensitivity setting
see chapter Adjustment  Operating level 1  Detection level

Strong “Product effect“
Solution:
Carry out “product learning“
see chapter Adjustment  Operating level 2  Learn product
6. Zoom Only the display of the image is changed with the + and – signs;
the evaluation is not changed by this.
The image is returned to its original form with the square button.
7. Login: User selection / Log off / Back button
8. Operating level 1: Access operating level 1
9. Operating level 2: Access operating level 2
10. Operating level QM: Access to ‘QM’ level (quality management)
11. Direct selection keys F1and F2: F1 = menu item Learn product
F2 = menu item Detection level