Mesutronic METRON 07 C, Перевод оригинального руководства пользователя

Страница: 65 / 84

-63- Errors and Problems
2-012 Error: „System monitoring: receiver voltage too high“
The receiver voltage lies outside the tolerances. Is there a large metal part in or immediately in front of the
detector coil?
Check the connections and contacts in the receiver terminal box.
2-013 Error: „System monitoring:
Max board temperature reached“
The temperature of the circuitry is too high. Check the fan or the ambient temperature.
2-014 Warning: „Detection inactive“
The metal detection and ejection procedure of the detector has been deactivated.
2-015 Notice: „Detection active“
The metal detection and ejection procedure of the detector has been activated.
2-016 Warning: „mesuNET: no connection to the server“
The log data (mesuNET) buffered on the unit concerned exceeds a size of 3 KB (approx. 40 messages).
Check the Link0 and Link1 LEDs. Check the connection.
2-017 Error: „mesuNET: no connection to server – loss of data
The log data (mesuNET) buffered on the unit concerned exceeds a size of 100 KB (approx. 1300 messages).
In this case no further data will be buffered.
Check the Link0 and Link1 LEDs. Check the connection.
2-018 Error: „Error while calculation“
Please learn the product again.