Quickstart Guide : CD Mastering
Page 72
Burning a CD-R
DiscWrite
is a separate application bundled with Pyramix Virtual Studio that is used to write the CD-R (or DDP)
image file out to a CD-R disc (or DDP tape) unit. To burn a CD-R from a CD image file created above:
1.
Launch
DiscWrite
. A normal Pyramix Virtual Studio installation will put a
DiscWrite
icon on the Desktop.
2.
In the
Image
section, click the
Open Image...
button, then navigate to and select a previously created CD
Image file (an .
img
file).
3.
In the
Device
section, click in the pop-up register to select a CD-R device.
DiscWrite
should recognize a previ-
ously configured CD-R device which is also recognized by the OS itself.
4.
Also in the
Device
section, click on the
Settings...
button to open the
CD-R Settings
window. Set these as
desired for the CD-R burning session. Please see the
Pyramix Reference Guide
for complete explanations of
all these settings.
5.
When all CD-R settings are adjusted as needed, click the
Burn
button in the
Image
section to actually burn
the CD-R.
Red Book Compatible Masters
If the CD-R is to be used as a “Red Book” compatible master "
Disc at Once
"
MUST
be selected.
CD Copy
Where suitable hardware is available, a CD may be directly copied by selecting a CD-ROM drive as the source and a
CD-R/RW drive as the destination.
TOCs
Print TOC...
prints the current TOC in the currently selected report format.
Save TOC...
opens a file save dialog to save the current TOC as a text (.txt) file.
Select Report...
opens a file open dialog. Any previously designed TOC report format (*.lst) may be loaded
.
DiscWrite application window
