Quickstart Guide : Installing Pyramix Virtual Studio Software
Page 15
6.
Override any warnings about unsigned drivers during the installation process.
7.
Plug in the security USB dongle.
8.
Enter the optional keys in MT Security Settings, if necessary.
9.
Restart the PC..
10.
Before attempting to launch Pyramix, please read First launch on page 16
Note:
If the installation appears to freeze for a long period please check that the Driver
Signing warning dialog is not hidden behind another Window. Installation will not con-
tinue until you click OK in this dialog.
WARNING:
Certain computers do not properly shut down despite the reboot command issued by the installer but
only perform a log off.
In this case, please activat a full shut down manually.
Authorization System
The Pyramix software and its various software options are protected by an authorization key mechanism which
uses a unique registration key number generated by Merging Technologies. Based on purchased software compo-
nents, this key is unique to your Sentinel or HASP USB dongle serial number or Mykerinos board serial number,
your Company Name and your User name. Once you have registered your software you will be provided with this
Key or Keys (depending on the options chosen).
When you receive your Pyramix Package you should also receive either an email from your Merging technologies
Sales Partner or a printed copy of the email containing your security setting details. If you did not receive this key,
have lost it or would like to change the user and/or company name, please contact your Merging Sales Partner
with your Mykerinos serial #, your User Name, your Company Name and the list of purchased software compo-
nents. Usually, a key can be issued within one business day, after the verification of your personal data has been
completed.
Enabling Pyramix Virtual Studio with your Software Key
Pyramix
Virtual
Studio
is protected by a special software Key. Once you have registered your software you will be
provided with this Key or Keys (depending on the chosen options).
Entering your Key(s)
After the Pyramix installation process you will be prompted to enter your
Authorization Key
. If you click
Yes
the
MT Security Settings
dialog will be launched automatically, allowing the Key or Keys to be entered immediately.
If you choose not to enter your Key at this point you can do so later by choosing one of the following procedures:
1.
Double-click the file
YourPersonalKeyXXXXX.mtk
. This is attached to the email containing your Key(s).
2.
Open the
MT Security Settings Control Panel
(Windows Task Bar
Start > Control Panel > MT Security Settings
),
click the
Import Key
button and browse for your Key file called
YourPersonalKeyXXXXX.mtk
3.
Open the
MT Security Settings Control Panel
(as above), in the
Registration
section select the board num-
ber corresponding to the serial number for your Keys or HASP Key for a dongle, click the
Enter Key
button
and type your
User Name
,
Company Name
and
Key
then click
OK.
Repeat this step for each Keys listed in the
email.
Changing or re-entering a Key
Should you need to subsequently change or re-enter a
Key
, follow the appropriate option above.
The key system is "smart". Only one key or set of keys is required regardless of the number of boards in a system.
Any card can hold this key set as the authorization is processed based on a "Logical OR" of all keys present on any
and all Mykerinos boards. Of course this Logical OR will only process keys with identical User Name and Company
Name to the one entered in the key enabling window.
