Quickstart Guide : Navigation
Page 47
Head to Nearest
When active, moving a Selected Cue or Range results in its beginning snapping to
the nearest Cue on the Track(s) or the Playhead Cursor or In/Out Marker.
Tail to Nearest
When active, moving a Selected Cue or Range results in its end snapping to the
nearest Cue on the Track(s) or the Playhead Cursor or In/Out Marker.
Snap to Original TimeCode
When active, moving a Selected Cue results in it snapping to the Original Time-
Code as stamped in the file.
Note:
Whenever a mode is selected which can affect other Cues, e.g.
Ripple
then the
label displayed in the Toolbar turns red.
Jog / Shuttle
Scrub Using the Middle Mouse Button
Audio can be scrubbed by holding down the middle mouse button while the cursor is in the Timescale area and
moving the cursor left to scrub in reverse or right to scrub forward. The distance moved away from the current
play cursor position will determine the relative playback speed.
When the play cursor reaches the current mouse
pointer position, or the middle mouse button is released, playback will stop.
Shuttle
The transport can be shuttled with audio output at up to 8 times speed.
Auto Jog
Where a physical controller with a jog / shuttle wheel is available, Pyramix can be set so that moving the jog wheel
automatically enters Jog mode.
Settings
Jog / Scrub parameters are set in the
Settings > All Settings > Application > Jog/Chase
page.
Jog Settings
Jog Speed ceiling
Four Radio Buttons offer the choice of
1X
,
2X
,
4X
or
8X
nominal play speed.
Flywheel responsiveness and inertia
Responsive
follows the actual movements as sent by the jog wheel.
Smooth
passes the actual movement
through a smoothing filter. So, when the slider is set to
Responsive
the
Smoothing Filter
parameters have no
effect.
For sound to picture work where tight sync to picture is required use a setting biased to
Responsive
. For a more
pronounced flywheel effect choose a
Smooth
er setting.
The Middle position is a good starting point.
Jog - sensitivity [0.33] second(s) per revolution
Sets the time moved in one revolution of the jog wheel. Type the required value in the box.
Shuttle - sensitivity [2] revolution(s) for nominal speed
Sets the fraction of a revolution or number of revolutions required to maintain nominal speed. E.g. an entry of 0.25
will require a quarter of a turn clockwise to achieve nominal speed.
Navigate - sensitivity [3] revolution(s) to traverse the timeline
Navigate is silent jog mode. Sets the number of revolutions of the jog wheel required to traverse the visible time-
line. I.e. the actual speed varies with the zoom setting.
Geared Jog mute when timeline view range is > 00:00:10:00
Audio will be muted when the Timline view range exceeds the value in the register.
