Merging Pyramix Скачать руководство пользователя страница 65 | Manualshive

Страница: 65 / 83

background image

Quickstart Guide : Strip and Bus Tools - Plug-ins

Page 65

Band Selector

Click onto one of these five buttons to select the band to be manipulated by the Gain, Frequency and Q control
underneath. A band gets also selected if it is manipulated in the small or big graph window.

Selected band characteristics

These five buttons determine the characteristics of the selected EQ band. The choices from left to right are High-
Pass Filter, Low Shelving, Peak, High Shelving and Low-Pass Filter.

Selected Band On/Off

Switches the selected EQ band on or off. By default the five bands are switched off in order to economize DSP
power, so don’t forget to switch an EQ band on before you can hear what it is doing.

Gain Control

-24 dB to +24 dB, boost and cut.

Frequency Control

The range for each band is depending on the sampling rate of the project:

•

For sampling rates up to 48 kHz the frequency range of each band is 20 Hz to 20 kHz.

•

For sampling rates up to 96 kHz the frequency range of each band is 20 Hz to 40 kHz.

•

For sampling rates up to 384 kHz (e.g. DXD mixing) the frequency range of each band is 20 Hz to 80 kHz.

Q (bandwidth) Control

The range for the Q parameter is 0.2 up to 100. A Q of 0.2 results in a very wide bandwidth, a Q of 100 will give an
extremely narrow notch.

Output Section

Show/ Hide Output section

Output section on/off

Output Level control

Adjusts the output level over a range of -48 dB to +48 dB.

Automatic Gain Make Up switch

When lit, Output gain is automatically adapted according to the settings in the

Dynamics Section

. In this case the

Output Level Control

will be grayed out and inaccessible.

The Big Graph Window

The big graph window opens when you double-click the small graph window inside the

EQ Section

. The current

settings of the selected EQ band are displayed as a blue line and the resulting overall EQ curve is displayed as a
gray shaded area. Frequency and Gain parameters of each of the five bands can be altered by clicking on a band’s

Output Level Control

Show/Hide Output Section

Output Section On/Off

Auto Gain Make-Up Switch

Color bar indicates Selected

«
...
63
64
65
66
67
...
»

Содержание Pyramix




















































































Отзывы:

Нет отзывов

Похожие инструкции для Pyramix

Бренд: Kawai Страницы: 66

Бренд: TC Electronic Страницы: 20

Бренд: Artesia Страницы: 36

Бренд: YOKOGAWA Страницы: 53

Бренд: GE Страницы: 35

Бренд: Yamaha Страницы: 24

Бренд: Hanna Instruments Страницы: 2

LaserHybrid SB 360i

Бренд: Fronius Страницы: 104

Бренд: Gates Страницы: 112

Бренд: PCB Piezotronics Страницы: 16

fieldscout TDR 100

Бренд: Spectrum Techniques Страницы: 20

Бренд: Teledyne Lecroy Страницы: 4

Бренд: PASCO Страницы: 4

Бренд: LaserLine Страницы: 11

Бренд: SANKO Страницы: 97

Бренд: Staco Energy Страницы: 2

Бренд: Isspro Страницы: 2

WJ-NX310K Series

Бренд: i-PRO Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды