Quickstart Guide : Recording
Page 36
All Settings > Project
The
All Settings > Project
folder has three pages,
Information
,
Record
and
Controller Mapping
. These allow
configuration of settings and information specific to the Project. For now, we will briefly look only at the
Record
page.
Use the Record page to define the destination folder, file type, bit depth and format for all Media Files captured or
imported into the Project. This information is required before any capture of audio can be accomplished. Select
the Windows folder for the Media Files using the
Media Folder
text entry box. The combo box accesses all
mounted Media Folders and the adjacent
...
button opens a browser. The default destination will normally be the
\PmxMedia\
folder. Choose the bit depth or word length for captured or imported files from the
Resolution
combo box. This will normally be either 16-bit (16 bps) or 24-bit (24 bps). Choose the file format for captured and
imported audio Media Files using the
Format
combo box. A variety of file formats can be chosen, although the
native PMF file format is most efficient and is especially recommended for projects with a high track count. Finally,
tick the
One file per track
box to generate a separate monaural Media File for each track recorded or imported
into Pyramix rather than a single interleaved Media File containing all tracks recorded in a single pass.
Recording
Recording Audio into a Pyramix Virtual Studio Project
Start a new Project, or open an existing one. Be certain to set the Mixer sample rate and sync source as desired.
You will need to configure at least the number of Mixer Strip channels as the number of Tracks you wish to record.
All Settings Project Record page
