Mercury 225 EFI, Руководство по обслуживанию

Страница: 688 / 719

ATTACHMENTS / CONTROL LINKAGE
90-884294 OCTOBER 2001 Page 7-21
Lubricate holes in ends of steering cables, with 2-4-C Marine Lubricant with Teflon. As-
semble steering link rods to steering cable ends of each outboard, using flat washers and
nylon insert locknuts. Tighten locknuts until they seat [DO NOT exceed 120 lb. in. (13.5
Nm) of torque], then back nut off 1/4 turn.
Lubricate ball joints in steering link rods with SAE 30W Motor Oil (obtain locally). Secure
link rods to outboard steering arms, using special washer head bolts (10-849838) pro-
vided and nylon insert locknuts as shown. Torque special bolts to 20 lb. ft. (27 Nm) then
torque locknuts to 20 Ib. ft. (27 Nm).
50061
28165
a
b
f
e
a
c
e
d
a
a
b
c
d
e
f
b
f
d
c
e
a - Flat Washer (2 Each Link Rod)
b - Nylon Insert Locknut - Torque Until it Seats [DO NOT Exceed 120 lb. in. (13.5
Nm) of Torque], Then Back Off 1/4 Turn
c - Special Washer Head Bolt (10-849838) - Torque to 20 lb.ft. (27 Nm)
d - Nylon Insert Locknut - Torque to 20 lb. ft. (27 Nm)
e - Steering Link Rod
f - Steering Cable End