Mediana YM6000, Руководство по обслуживанию

Страница: 9 / 100

Introduction 3
YM6000 Service Manual
Manual Overview
This manual contains information for servicing the YM6000 monitor.
The monitor subsequently referred to as the monitor throughout this manual. Only
qualified service personnel should service this product. Before servicing the monitor,
read the operator’s manual carefully for a thorough understanding of safe operation.
Read and understand all safety warnings and service notes printed in this service
manual.
and the operator’s manual part number A7076.
Related Documents
To perform test and troubleshooting procedures and to understand the principles of
operation and circuit analysis sections of this manual, you must know how to operate
the monitor. Refer to the monitor operator’s manual part number A7076.
To understand the various SpO
2
sensors, ECG leads, blood pressure cuffs, and
temperature probes that work with the monitor, refer to the individual directions for
use that accompany these accessories.
Intended Use for the YM6000 Monitor
The YM6000 monitor is intended to be used to monitor electrocardiography, heart rate,
pulse rate, noninvasive blood pressure (systolic, diastolic and mean arterial pressures),
functional arterial oxygen saturation, invasive blood pressure, respiration,
capnography (EtCO
2
and InCO
2
) and temperature for adult, pediatric and neonate
patients in all areas of a hospital and hospital ‐ type facilities. Monitor users should be
skilled at the level of a technician, doctor, nurse or medical specialist.
Note: Hospital use typically includes such areas as general care floors, operating
rooms, special procedure areas, intensive and critical care area, within the
hospital. Hospital ‐ type facilities include physician office ‐ based facilities, sleep
labs, skilled nursing facilities, surgicenters, and sub ‐ acutecenters.
Identifying the YM6000 monitor Configurations
The following table identifies YM6000 monitor configurations and how they are
indicated. The model ‐ option number and serial number are located on the back of the
monitor. All information in this manual, including the illustrations, is based on a
monitor configured with the Capnography (EtCO
2
and InCO
2
), IBP and recorder. If
the relevant functions do not exist, please verify your unit configuration.
Model ‐ option Description
YM6000 ‐ 0 Basic (ECG, NIBP, SpO
2
, 2 ‐ channel Temperature, Respiration)
YM6000 ‐ P0 Basic + Recorder
YM6000 ‐ 0B Basic + IBP
YM6000 ‐ 0E Basic + Capnography
YM6000 ‐ P0B Basic + Recorder +IBP
YM6000 ‐ P0E Basic + Recorder + Capnography
YM6000 ‐ 0BE Basic +IBP + Capnography
YM6000 ‐ P0BE Basic + Recorder + IBP + Capnography