Mediana YM6000, Руководство по обслуживанию

Страница: 45 / 100

Service Menu and Factory Default Settings 39
YM6000 Service Manual
System Setting
This menu displays the information for system settings.
Monitor On Time
This menu displays the number of hours, minutes and seconds, rounded to the
nearest hour that the monitor has been operational. The term that the monitor is in the
service mode is not included.
Recorder On Time
This menu displays the number of hours, minutes and seconds, rounded to the
nearest hour that the Recorder has been operational.
Battery Deep Discharges
This menu displays the number of deep ‐ discharge cycles seen by the battery. The
monitor records a deep discharge cycle when the monitor is automatically turned off
after a “Critically Low Battery” alarm is issued.
System Software Version
This menu displays the revision level of the system software. The revision level is also
shown on the LCD as part of the Copyright screen.
Module Version
This menu displays information for each module or board version.
Print Value of Configuration
This menu is used to print out the set values. This function is useful when collecting a
wrong value.
Tone Set (Detail)
This menu used to set the HR/PR tone with High, Medium, Low or SpO
2
.
Note: The values of Monitor On Time, Recorder On Time and Battery Deep
Discharges may not be reset, but they will be reset to zero when a new CPU
module is installed.
System Test
These menus provide to facilitate performing verification testing for the overall
system.
For a detailed procedure, refer to Performance Verification section .
Table 11. System Test
Tests Description
LCD Test tests the LCD display.
Alarm Audible Test tests the alarm tones.
Tone audible Test tests the HR/PR tones, the key beeps and the completion
sounds.
Backup RAM Clear is used to set the factory defaults.