Mediana YM6000, Руководство по обслуживанию

Страница: 15 / 100

YM6000 Service Manual
Routine Maintenance
WARNING: Do not spray or pour any liquid on the monitor or its accessories. Do
not immerse the monitor or its accessories in liquid or clean with caustic or
abrasive cleaners.
Cleaning
The monitor may be surface ‐ cleaned by using a soft cloth dampened with either a
commercial, nonabrasive cleaner or one of the solution listed in the below. Lightly
wipe the top, bottom and front surfaces of the monitor lightly.
z
Quatemary Ammonium
z
Alcohol ‐ 70% Isopropyl
z
10% Chlorine bleach solution
z
PDI Sani ‐ System
For cables, sensors, cuffs, and probes, follow cleaning instructions in the directions for
use shipped with those components.
Avoid spilling liquid on the monitor, especially in connector areas. If liquid is
accidentally spilled on the monitor, clean and dry thoroughly before reuse. If in doubt
about monitor safety, refer the unit to qualified service personnel for checking.
Periodic Safety and Functional Checks
The monitor requires no routine service or calibration other than cleaning and battery
maintenance. The following performance verification tests may be used following
repair or during routine maintenance (if required by your local institution). The
following checks should be performed at least every 2 years by qualified service
personnel.
1. Inspect the exterior of the monitor for damage.
2. Inspect labels for legibility. If the labels are not legible, contact Mediana Technical
Service Department.
3. If the monitor has been visibly damaged or subjected to mechanical shock (for
example, if dropped), perform the performance tests as described in Performance
Verification section. If the unit fails these performance tets, refer to Troublehooting
section.
4. Perform the electrical safety tests detailed in Performance Verification section. If
the unit fails these electrical safety tests, do not attempt to repair. Contact Mediana
Technical Service Department.
5. Inspect the fuses for proper value and rating.
qty 2, 6.3 A, 250 volts for AC mains