Mediana YM6000, Руководство по обслуживанию

Страница: 77 / 100

Disassembly Guide 71
YM6000 Service Manual
C5. Knob disassembly
1. Pull the trim knob straight out to remove from the front case.
C6. LCD window disassembly
1. Remove the LCD window from the front case.
C7. Encoder board disassembly
1. Turn the encoder board assembly to the left to remove from the front case.
2. After separate the encoder board, remove the encoder wire.
C8. LCD guide disassembly
1. Remove 8 screws (3 × 8) on the LCD guide.
2. Turn the encoder board assembly to the left to remove from the front case.
C9. Alarm LED window and Power LED window disassembly
1. Remove the alarm LED window form the front case.
2. Remove the power LED window from the front case.
C10. ECG connector disassembly
1. Remove 4 tapping screws (3 × 8) on the ECG connector.
2. Remove the ECG connector from the front case.
C11. Temperature connector disassembly
1. Remove two nuts (14mm) fastening the temperature connector from the front case.
2. Remove two temperature connectors from the front case.
C12. Water trap receiver disassembly
1. Pull the water trap receiver straight out to remove from the front case assembly.
C13. IBP connector disassembly
2. Remove 2 screws (3 × 8) on the IBP connector (4 pin).
1. Remove the IBP connector form the front case.
2. Remove 2 screws (3 × 8) on the IBP connector (5 pin)
3. Remove the IBP connector from the front case.
C14. Rubber foot disassembly
1. Remove two rubber foots from the front case.