Page 121 P/N 03521015 Rev U1
Bio-Medical Devices Intl
17171 Daimler Street Irvine, CA 92614 800-443-3842 www.maxair-systems.com
32.
Specifications
Specifications listed are approximate and may vary slightly from unit to unit or by power supply fluctuations and/or tolerance of
the controller.
CAPR SYSTEM
#
PROPERTY
SPECIFICATIONS (NIOSH)
1
Complete Device Classification
PAPR, Loose Fitting
2
89/686/EEC Complete Device Category
N/A
3
93/42/EEC Complete Device Class
N/A
4
EMC Classification
(IEC 60601-1-2: 2007; EN 60601-1-2:2007)
N/A
5
Storage Temperature Range
-
6
Storage Maximum Humidity
-
7
Effective field of vision versus natural field of vision
N/A
8
Overlapped Field of vision versus natural field of vision
N/A
9
Maximum Inward Leakage
N/A
10
Fit Factor
Minimum 500
11
Maximum allowable Percent Leakage:
Dioctyle-Phthalate Test
0.03% @ 107 LPM
12
Minimum allowable NaCl efficiency
99.97% @ 125 lpm
13
Maximum Breathing Resistance
N/A
14
Minimum Airflow
170 LPM
15
Battery
-
16
Noise Level
80 dBA limit
17
Total Mass/ Total Mass on Head
-
18
2164-10 Filter Classification
HE*
“-“=Equivalent
“*”= NIOSH approved HE protection filters can be used for protection against particulate aerosols containing oil. However, for
reliable operation and desirable useful run time, Bio-Medical Devices Intl does not recommend Filter Cartridge use against
particulate aerosols containing oil.
2500-30TSC/ 2500-37TSC/ 2500-36TSC/2561-01 Battery Specification
IPXO Ordinary Equipment
Duty Cycle: Continuous Operation.
# PROPERTY
SPECIFICATIONS
All Filters excluding 2166-10
Filter 2166-10
1
Minimum Continuous Operating Time: 2500-36TSC
4 Hrs. (Typical 4-10 hr./Charge)
N/A
2
Minimum Continuous Operating Time: 2500-37TSC, 2561-01
6 Hrs. (Typical 6-15 hr./Charge)
4 Hrs. (Typical 4-9 hr./Charge)
3
Minimum Continuous Operating Time: 2500-30TSC
8 Hrs. (Typical 8-20 hr./ Charge) 6 Hrs. (Typical 6-14 hr./Charge)
4
Charge Input
16.8V; 1A
5
Electrical Output: 2500-36TSC
14.8V; 2.25Ah
6
Electrical Output: 2500-37TSC, 2561-01
14.8V; 3.35Ah
7
Electrical Output: 2500-30TSC
14.8V; 4.50Ah
2600-01 Charger Specification
# PROPERTY
SPECIFICATIONS
1
Complete Charge for 2500-36TSC, 2500-37TSC, 2561-01, or
2500-30TSC
4-6 Hours for a Fully Drained Battery
2
Electrical Output
Up to 16.8V; Up to 0.9A
3
Electrical Input
100-240 VAC; 50-60Hz; 0.3A
