12
Matrox Productiva G100 Multi-Monitor Series – User Guide
2
Connect audio input
To connect the audio output of your video
camera or video player, you need an audio
cable with a stereo jack on one end and two
RCA connectors on the other end. This type of
cable is available at most electronics stores.
a
Plug the stereo-jack end of the audio cable
into the
LINE IN
connector on your sound
card.
b
Plug the other end into left (
L
) and right
(
R
)
AUDIO OUT
on the video device you
connected to in
step 1
. (On the audio
cable, white is for “left” and red is for
“right”. If your video device has only one
audio connector, use the left audio
connector on the cable.)
For more information on audio input types,
see
“Matrox video input”, page 14
.
3
Connect TV antenna or cable TV
Connect a TV antenna or cable TV to
ANT/CABLE
on your Matrox product.
If the cable from your antenna is flat and ends
with twin leads, you need a 300-to-75-ohm
adapter to connect to the
ANT/CABLE
connector (see below). You can find this type
of adapter at most electronics stores.
SCART connectors: If your video camera or video player only uses a
SCART audio/video connector (see picture), you may need to purchase
a SCART adapter. For more information,
see “SCART information”,
page 13
.
Video camera or
video player
300-to-75-ohm
adapter
