Matrox Productiva G100 Multi-Monitor Series – User Guide
11
Connection setup
(Matrox TV tuner required)
Quick connection setup
1
Connect video input
To use a video camera or video player
*
as a
video source, you need a composite video
(RCA) cable. This type of cable is available at
most electronics stores.
a
Plug one end of your video cable into the
video connector on your dual-monitor
adapter.
b
Plug the other end into the
VIDEO OUT
†
connector (usually yellow) on your video
camera or video player.
For more information on video input devices,
see “Matrox video input”, page 14
.
* A video player can be any device that generates a video signal. For example, a VCR, videodisc player or DVD
player.
† The labels on your devices may not be consistent with what’s in this guide. Different manufacturers sometimes use
different labels for the same type of controls and connectors. For example, the
VIDEO IN
connector on your TV
may be labeled
VIDEO 1
(or
VIDEO 2
). To match labels, see the documentation for your video devices.
TV tuner
Composite video
(RCA) connector
(“VIDEO IN”)
TV antenna or cable TV
connector (“ANT/CABLE”)
Dual-monitor
adapter
(Matrox Productiva G100-Quad card with a TV tuner)
This section is only for Matrox
products that include a TV tuner.
Video camera or
video player
